How To Program Alphanumeric Characters; Using Character Keys On The Keyboard - Sharp UP-700 Instruction Manual

: Used to list those options which you can toggle by the
SBTL
: Used to call up a desired code.
(RECALL)
: Used to update PLU unit price or name.
(UPDATE)
Numeric keys: Used for entering figures.
For more information about using these keys, see the "Basic Instructions" section in Chapter 13
"Programming."

How to Program Alphanumeric Characters

This section discusses how to program alphanumeric characters such as "DESCRIPTION," "NAME" and
"TEXT."

Using character keys on the keyboard

Entering alphanumeric characters
To enter a character, simply press a corresponding character on the programming keyboard sheet.
To enter a digit, simply press a corresponding numeric key.
Entering double-size characters
: This key toggles the double-size character mode and the normal-size character mode. The
(DC)
default is the normal-size character mode. When the double-size character mode is selected, the
letter "W" appears at the bottom of the display.
Entering upper-case letters
: You can enter an upper-case letter by using this key. Press this key just before you enter the
(SHIFT)
upper-case letter. You should press this key each time you enter an upper-case letter.
Editing text
You can edit the text you have entered by deleting and/or inserting characters.
To select a text editing mode
: Toggles between the insert mode ("_") and the overwrite mode (" ").
(INS)
To move the cursor
or : Moves the cursor.
To delete a character or figure
: Deletes a character or figure in the cursor position.
(DEL)
: Backs up the cursor for deleting the character or figure at the left of the cursor. When your POS
BACK
SPACE
terminal is in the insert mode, this key deletes the character or the value at the cursor position.
Text copy/paste
Copy (to the buffer):
Paste (from the buffer): Move the cursor to the target text line to paste, and press
92
Move the cursor to the target text line to copy, and press
key.
•
@
key.
FOR
key.
•