Remote Printer Send Function; Gratuity; Payment Treatment; Tip-In Entries - Sharp UP-700 Instruction Manual

Remote printer send function

This function enables a partial order to be sent to the kitchen for preparation while the remaining order is still
being placed.
Item entry
Remaining items will be sent to the remote printer when the transaction is finalized.
When this function is used, the subtotal void operation is not allowed.

Gratuity

Calculation
When the payment operation is made for sales registrations, the gratuity amount is always calculated and
printed.
You can program a percent rate for calculating the gratuity.
If the percent rate is programmed as 0%, the POS terminal does not print any gratuity.
You can program a tax status (taxable 1/taxable 2/taxable 3/taxable 4/non-taxable) for gratuity.
Exemption
Your POS terminal allows you to exempt a customer from the gratuity by pressing the
payment operation.

Payment Treatment

Tip-in entries

Your POS terminal allows the entry of tips that your guests give to servers in cash or by credit card.
A tip entry should be done before a payment entry.
You must use the corresponding media key e.g. CH1 thru CH9 for the charge tip and CASH 1 thru CASH 5
for the cash tip.
Two different tip-in entry systems are available: the tip amount entry system and the tip percent rate entry
system. It depends on how your POS terminal has been programmed which of these systems is used.
Tip amount entry system:
Tip percent rate entry system:
48
RP Data transfer to the remote printer
SEND
Tip amount
CASH
TIP
CHARGE
TIP
When you use a programmed percent rate
Tip percent rate
(0.01 - 99.99)
key prior to a
GRT
EX
CASH
TIP
CHARGE
TIP