Backlight; Color Theme; Aux: Auto-Standby; Wall Mounting - Hama DIR3100MS Operating Instructions Manual

15.9 Backlight

Brightness sensor activated
• Move the sliding switch (19) to the ON position.
• The brightness of the display is now automatically
adjusted according to the ambient brightness.
Brightness sensor deactivated
• Move the sliding switch (19) to the OFF position.
The backlight can be configured for each operating
mode (Operation Mode, Standby Mode, Slumber Mode)
separately.
• Proceed as follows:
• For the operation modes Operation Mode and
Slumber mode, select between various brightness
levels.
• For Standby Mode, you may also choose a brightness
level for the backlight when the radio is in standby
(Standby Level). Alternatively, you can set the backlight
to turn off completely in standby (Standby Level 
Off).
• Choose a time interval for Timeout. When the radio is in
standby, press [enter/navigate] to illuminate the display
at the brightness level set for that operating mode for the
selected interval of time.
• Alternatively, you can disable this feature (Timeout 
Off).
Alternatively, press [
adjust the backlight setting for the current operating
mode.
[menu]
System settings

Backlight
] on the remote control to directly

15.10 Color theme

To change the color scheme of the display (Color of text
and background), proceed as follows:

15.11 AUX: Auto-Standby

In Aux in (Auxiliary Input) operating mode, the radio
switches to standby mode after 15 minutes, by default.
To disable (NO) or activate (YES) this feature, proceed as
follows:

15.12 Wall mounting

Note
• Ensure that the mount you have chosen can carry a
load of at least 2.2 kg.
• Follow the directions and safety notes in the
documentation of the mounting bracket.
• With the correct mounting bracket (such as Hama item
no. 00118031), it is possible to mount the radio to the
wall.
• For this purpose, use the mounting holes (20) on the rear
of the radio.
36
[menu]
System settings

Color theme
[menu]
System settings

AUX: Auto-Standby