Table of Contents
Advertisement
16. Display settings
16.1 backlight
16.1.1 Time-out
This setting refers to the radio's standby mode, i.e. when the radio has been set to standby. The "Wait"
function refers to the period of time between switching off the radio and adjusting the lighting intensity.
seTTInGs
If the timeout function is deactivated, the intensity of the display illumination is adjusted immediately
when the radio is put into standby mode.
The "Display illumination" menu item allows you to again choose between the values "high",
"Medium", "low" and additionally "off", which completely deactivates the illumination of the display.
16.1.2 operating mode
naVIGaTe
The Display illumination setting refers to regular operation of the radio with the twilight sensor/auto
dimmer deactivated. You can choose between "high", which corresponds to maximum intensity,
"Medium" a reduction of the illumination to approx. 60%, and "low", which corresponds to very low
intensity.
16.1.3 standby
If a snooze function is activated via the Routines function, you can use this menu item to adjust the
Display settings
lighting intensity used during snooze mode. After snooze mode has ended, the radio switches to standby
mode and uses the intensity selected accordingly. The values "high", "Medium", "low" and "off" are
available to choose from.
16.2 Theme
This radio has several ready-made colour displays that differ in the colours of the text and the
enTeR
background. Choose your preferred colour scheme here.
note
The colour scheme is used by default.
DIsPlay seTTInGs
23
Advertisement
Table of Contents
