Backlight; Factory Reset; Info / Software Version; Software Update - Hama 00054896 Operating Instructions Manual

14.4 Backlight

Manual settings
The backlight can be configured for each operating mode
(Operation Mode, Standby Mode) separately.
Proceed as follows:
• Press [ ] (6) and navigate to the "Settings" menu item.
• Select "Backlight" and confirm by pressing [+/OK/-] (10).
• For the Operation and Standby modes, select from
various brightness settings.
Automatic settings (Sensor)
With the sensor enabled, the backlight is automatically
adjusted to the environment and its brightness.
In complete darkness (for example, at night in the
bedroom), the backlight completely turns off.
To activate the automatic setting (sensor), proceed as
follows:
• Press [ ] (6) and navigate to the "Settings" menu item.
• Select "Backlight" and confirm by pressing [+/OK/-] (10).
• Select the "Automatic" setting to activate the brightness
sensor.

14.5 Factory reset

To reset the radio to the factory default settings, proceed as
follows:
• Press [ ] (6) and navigate to the "Settings" menu item.
• Select "Factory reset" and confirm by pressing [+/OK/-]
(10).
Confirm the following prompt with [+/OK/-] (10) to reset
the radio to the factory settings.
All settings made previously are deleted.
Note
• Resetting to the factory default settings can remedy
some problems and malfunctions.
• However, all settings made previously, such as
favourites and station lists, are permanently deleted.

14.6 Info / software version

To have the radio display information about its software,
proceed as follows:
• Press [ ] (6) and navigate to the "Settings" menu item.
• Select "Version" and confirm by pressing [+/OK/-] (10).

14.7 Software update

Improvements and new features are always constantly
being developed for the software used in our radios to
resolve potential errors, increase the range of functions,
and so on. We recommend that you always install any
available updates on your radio.
Warning
• Make sure that the radio has a stable power supply
before you start a software update.
• Power supply failure during a software update can
cause irreparable damage to the radio.
Update port
The update port allows you to load software updates
manually.
Note
• Available updates and instructions on how to install
them can be found at: www.hama.com -> 00054896,
00054231
13