Kenwood CK 446 Instructions For Use Manual page 36

• Join the rear panel R to the right and left panels as shown in fig. 9.12.
• Remove screw V located at the rear of the cooker (fig. 9.10).
• Fix central bracket S between clip C on the panel and the cooker, and re-fit screw V
(fig. 9.13).
• The base skirting can be fixed to the cooker sides by means of holes F (fig. 9.8). For
this operation:
• Tip the cooker carefully over onto its front using pieces of expanded polystyrene for
protection.
• Fix the base to the sides by inserting the 4 self-tapping screws W (fig. 9.14 - page 35)
in holes F. Take care not to damage the side of the cooker.
Fig. 9.10
LD
Fig. 9.12
36
C
Fig. 9.11
R
R
V
P
S
V
Fig. 9.13