Filter Installation - Sharp FP-A28UW Operation Manual

FILTER INSTALLATION

FILTER INSTALLATION
To maintain the quality of the HEPA filter, it is packed in plastic bag and placed in the
unit. Be sure to remove the HEPA filter from the plastic bag and replace the HEPA
filter in the unit before initial use.
Remove the filter
1
Remove the Back Panel.
Gently push down on the upper tabs, then
tilt and remove the back panel.
Upper Tab
2
Remove the plastic bag from the
HEPA filter.
HEPA filter
Install the filter
1
Install the HEPA filter.
Please make sure that the HEPA filter
is placed in proper orientation.
Installing the HEPA filter backwards will
affect the performance of the unit
Pull
.
HEPA filter
E-9
Be sure to remove the power plug
from the wall outlet.
2
Insert the Back Panel's 2 bottom
tabs (left and right) into the
small holes in the unit.
3
Gently push the Back panel to
lock in place.
Push
4
Fill in the usage start date on
the Date label and place on the
unit as guide for when the filter
should be replaced.
Upper Tabs
Bottom tabs
Date Label