Table of Contents
Advertisement
Time-setting
0
options
Childproof lock
D
Temperature/
~/1
weight
start
Start/stop
l
stop
--------
Display
The display is structured so that the information can be
read at a glance in any situation.
The value that you can currently set is highlighted. It is
highlighted by a red bar displayed under the set value.
The value that is highlighted can be changed directly
using the rotary selector.
Display elements
Here you can find a short explanation of the various
display elements.
Symbol
Timer
t
Cooking time
y
Clock
0
h:min
Hours/minutes
min:sec
Minutes/seconds Cooking time in minutes and seconds
Childproof lock
D
Drip tray
#
Water tank
$
Descaling
Ê
--------
Drip tray and water tank status display
The status display only lights up when the rip tray or
water tank is required for the selected operating mode.
It can display various statuses and informs the user
when action is required.
Select the "Time-setting options" sym-
bol and use the rotary selector to set
the time-setting options you require.
Touch and hold to activate/deactivate
the childproof lock
Select and set the temperature/
weight using the rotary selector.
Starts or pauses the operation
Note:
Pressing and holding ends the
current operation and the settings for
the operating mode selected are reset
to the default values.
Meaning
If the symbol is highlighted, the timer
will appear on the display.
If the symbol is highlighted, the cook-
ing time will appear on the display.
If the symbol is highlighted, the clock
will appear on the display.
Cooking time in hours and minutes
If this symbol lights up, the childproof
lock is activated.
Drip tray status display
Water tank status display
If the symbol lights up, the appliance
must be descaled.
Getting to know your appliance
Water tank status display
Symbol
Symbol lights up,
arrow flashes
Symbol without
$
arrow flashes
Symbol without
arrow lights up
Drip tray status display
Symbol
Symbol lights up,
arrow flashes
Symbol without
arrow flashes
#
Symbol without
arrow lights up
Temperature indicator
The red bar at the bottom of the display shows that the
appliance is heating up.
If you are using the grill or steam mode, the entire bar
lights up red immediately.
The bar does not light up when the microwave function
is in use.
Night mode
To save energy, the display brightness is automatically
reduced to a lower level between 10 p.m. and 5.59 a.m.
Rotary selector
Use the rotary selector to change the adjustment values
that are shown in the display and highlighted.
In most selection lists, e.g. programmes, the first
selection follows the last.
For values, e.g. weight, you have to turn the rotary
selector back the other way when you reach the
minimum or maximum value.
Operating modes
Your appliance has various operating modes which
make your appliance easier to use.
You can find more precise descriptions of these in the
corresponding sections.
Meaning
Water tank is in the tank recess and
needs filling.
Water tank is not in the tank recess
and needs fitting in place.
Water tank is in the tank recess. No
further action necessary.
Meaning
Drip tray is in the tank recess and
needs emptying.
Drip tray is not in the tank recess.
Insert the drip tray into the tank
recess.
Drip tray is in the tank recess. No fur-
ther action necessary.
en
11
Advertisement
Table of Contents
