Table of Contents
Advertisement
Your new appliance
Use this section to familiarise yourself with your new appliance.
The control panel and the individual operating controls are
Control panel
Here, you will see an overview of the control panel. Depending
on the appliance model, there may be differences in the
particular details.
Buttons
The sensors are located under the individual buttons. They
must not be pressed too firmly. Only touch the corresponding
symbol.
Exception: the button for the series of operations and the
buttons for the microwave power settings are normal push
buttons.
Buttons
Symbol/button
Button function
Selects a series of operations
2
90
Selects 90 watt microwave power
180
Selects 180 watt microwave power
360
Selects 360 watt microwave power
600
Selects 600 watt microwave power
1000
Selects 1000 watt microwave power
Selects the type of heating
!
Selects automatic programmes
`
Selects automatic self-cleaning
q
Moves one line down in the display
X
Moves one line up in the display
Y
Selects the memory
f
Switches on rapid heating
c
Opens and closes the time-setting options
0
menu
Switches the oven light on and off
B
Press briefly = calls up information Press
°
and hold = opens and closes the basic
settings menu
Activates/deactivates the childproof lock
D
Switches the oven on and off
%
Press briefly = starts/pauses operation
n
Press and hold = cancels operation
explained. You will find information on the cooking
compartment and the accessories.
Rotary selector
The rotary selector is used to alter the default values and
[
setting values.
The rotary selector is retractable. Press on the rotary selector to
pop it in or out.
Display
The display is divided into different sections:
Heading, only appears prior to starting
■
Settings area
■
Status bar
■
Heading
The function selected is shown in the top line, e.g. types of
heating, programmes, time-setting options, etc..To the right of
this, arrows indicate the direction in which you can navigate
using the
X
and
Y
buttons. The heading disappears after
starting.
Settings area
Suggested values appear in the settings range, which you can
change. You can change from one line to the next using the
and
Y
navigation buttons. Brackets are displayed around the
line you are currently in. You can use the rotary selector to
change the value in the brackets.
Status bar
The status bar is at the bottom of the display. It displays the
current time, time-setting options which are running down or the
childproof lock setting. You are given short instruction texts on
setting if required.
Temperature indicator
The temperature indicator bars show the heating phases or
residual heat in the cooking compartment.
X
7
Advertisement
Table of Contents
