Installation And Connection; The Control Panel; Rotary Selector; Accessories - Bosch HMT75M421R Instruction Manual

Installation and connection

This appliance is intended for domestic use only.
Place the table-top appliance on a solid, level surface (at least
85 cm above the floor). The ventilation slots at the top must be
unobstructed at all times.
The appliance is ready to be plugged in and must only be
connected to a Schuko socket that has been correctly installed.
The circuit breaker must have a rating of 10 A (L- or B-type
circuit breaker).The mains voltage must correspond to the
voltage specified on the rating plate.

The control panel

Here, you will see an overview of the control panel. Depending
on the appliance model, there may be differences in the
particular details.

Rotary selector

The rotary selector is used to alter the default values and set
values.
The rotary selector is retractable. Press on the rotary selector to
lock it in or out.
20
Only a qualified electrician may install the socket or replace the
power cable.The appliance plug must always be accessible.
Do not use multi-socket adaptors, power strips or extension
leads. Overloading causes a risk of fire.
Note: You can fasten your microwave appliance directly to the
underside of a wall cupboard in the kitchen. Refer to the
special mounting template.

Accessories

Caution!
When removing dishes, make sure that the turntable does not
move. Make sure that the turntable is properly locked. The
turntable can turn left or right.