Dodge Challenger SRT Includes 392/Hellcat 2016 Owner's Manual page 411

6. Fully depress the clutch pedal and make sure the
vehicle is in first gear.
7. While holding the clutch depressed, rapidly apply the
accelerator pedal to wide open throttle. The engine
speed will hold at the pre-selected launch RPM. The
engine speed will hold at the RPM that was set in the
"Launch RPM Set-up" screen.
NOTE: Messages will appear in the Driver Information
Display (DID) to inform the driver if one or more of the
above conditions have not been met.
8. When conditions 4 through 7 have been met, the
Driver Information Display (DID) will read "Launch
Ready Release Clutch". Release the clutch quickly and
continue to hold wide open throttle to launch execute
shifts. Refer to "Manual Transmission – Shifting" in
this section for further information.
Release the clutch and continue to hold wide open
throttle to launch.
9. Keep the vehicle pointed straight.
Launch mode will be active until the vehicle reaches
62 mph (100 km/h), at which point the ESC system will
return to its current ESC mode.
Launch mode will abort before launch completion, dis-
play "Launch Aborted" in the cluster and return to ESC
Full ON under any the following conditions:
• The brake is applied during launch.
• The ESC system detects that the vehicle is no longer
moving in a straight line.
• The "ESC OFF" button is pushed to change the ESC
system to another mode.
NOTE: After launch mode has been aborted, ESC will
return to its current ESC mode.
STARTING AND OPERATING 409
5