Table of Contents
Advertisement
3. Install the controls according to the system prompt. Once the controls are installed IE displays
the Web Interface main page.
4. Modify the administrator password as soon as possible after you successfully logged in.
5.5 Configuring Local SD Card Recording
The devices Web interface contains settings to control the recording medium and to configure an
alarm that triggers once the Micro SD card passes a pre-determined storage.
1. Access the Web Interface for the device and click the Setup tab. Expand the Storage menu, then
choose the Destination page.
2. Select the recording medium for each event Recorded and Snapshot event, Scheduled, Motion
Detect and Alarm. Select the Local check box to record an event to the Micro SD card.
3. Click the Local tab to view the used capacity and the total capacity of the Micro SD card.
Figure 5-4
Figure 5-5
16
Advertisement
Table of Contents
