Scandomestic WFO 1301 User Manual page 64

3 Program
For normally soiled loads that need quick wash.
A shorter wash for lightly soiled loads that do not need drying.
4 Half-load Press the 90 min button and Rapid button at the same time to select
half load function before the start of the program.
When you have about or less than half of full place settings dishware
to wash, you can choose this function to save energy and water. (It can
only be used with Intensive, Universal, ECO, Glass and 90 min.)
When pressing this button, corresponding indicator will be lit.
5 Start/Pause To start the selected washing program or pause it when the
dishwasher is working.
Display
6 Warning
indicator
7 Delay time
90 min
Rapid
Rinse Aid indicator
If the indicator is lit, it means the dishwasher is low on
dishwasher rinse aid and requires a refill.
Salt indicator
If the indicator is lit, it means the dishwasher is low on
dishwasher salt and needs to be refilled.
Water failure
If the indicator is lit, it means the water faucet is not open.
To show the delay time. (3h/6h/9h/12h)
64