Scandomestic WFO 1301 User Manual page 59

Knocking
noise in the
water pipes
Unsatisfied The dishes
washing are not
result clean
This may be caused by
on- site installation or
the cross- section of
the piping.
The dishes are not
loaded correctly
The programme was
not powerful enough.
Not enough detergent
was dispensed.
Item are blocking the
path of spray arms.
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause the
spray arm jets to get
blocked.
59
This has no influence on dishwasher function. If in
doubt, con- tact a suitably qualified plumber.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ".
Use more detergent, or change your detergent.
Rearrange the items so that the spray can rotate
freely.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets. See "Cleaning the Spray
cabinet is not clean or Arms".