Yamaha Lexi ABS GDS125-A Owner's Manual page 38

Instrument and control functions
When the main switch is turned on, all
of the display segments of the fuel me-
ter will appear for a few seconds, and
then the fuel meter shows the actual
fuel level.
TIP
 Do not use up all of the fuel in the
fuel tank.
 The fuel meter is equipped with a
self-diagnosis function. If a prob-
lem is detected in the fuel meter
electrical circuit, all the display
6
segments will flash repeatedly. If
this occurs, have a Yamaha dealer
check the vehicle.
NOTICE
When the fuel indicator has dropped
to only one block, refuel as soon as
possible, as the movement of fuel
when going up or downhill or when
turning may lead to the engine not
getting any fuel, resulting in engine
stop.
Multi-function display
The multi-function display is equipped
with the following:
 an odometer
 a tripmeter
 an instantaneous fuel consump-
tion display
 an average fuel consumption dis-
play
 a battery voltage indicator
 a backlight setting
 an error code display
Push the "RESET/SELECT" button to
switch the display between the odom-
eter "ODO", the tripmeter "TRIP", the
instantaneous
"F/ECO" (km/L or L/100 km), the aver-
age fuel consumption "AVE F/ECO"
(km/L or L/100 km), the battery voltage
ECAV0041 "BATT", and the backlight setting ("bL-
01", "bL-02", or "bL-03") in the follow-
ing order:
ODO → TRIP → F/ECO → AVE F/ECO
→ BATT → bL → ODO
Odometer mode
1. Odometer
The odometer shows the total distance
fuel consumption
traveled by the vehicle.
Tripmeter mode
1. Tripmeter
The tripmeter shows the total distance
traveled since it was last reset.
6-5
1
1