Operation And Important Riding Points; Starting The Engine - Yamaha Lexi ABS GDS125-A Owner's Manual

Operation and important riding points

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
8
EAU15952
NOTICE
Do not ride through deep water, oth-
erwise the engine may be damaged.
EWA10272
Avoid puddles because they may be
deeper than expected.
EAUN0073

Starting the engine

ECAN0072
NOTICE
See page 8-3 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the side-
stand must be up. (See page 6-17.)
1. Turn the main switch on.
TIP
The ABS warning light should come on
and stay on until the vehicle reaches a
traveling speed of 10 km/h (6 mi/h) or
higher.
8-1
The following warning lights and
indicator lights should come on for
a few seconds, then go off.
 Engine trouble warning light
 Coolant temperature warning
light
 Turn signal indicator lights
 Stop and Start System indi-
cator light
 Smart key system indicator
light
 ABS warning light
EAU77801
ECA10251