Yamaha Lexi ABS GDS125-A Owner's Manual page 40

Instrument and control functions
The battery voltage indicator
1
1. Battery voltage display
This indicator shows the current
6
charge state of the battery.
 Over 12.8 V Full charge
 Under 12.7 V Charging is required.
TIP
If the battery voltage is less than 9.0 V,
"_ _._" will be displayed.
Backlight setting mode
1
1. Backlight setting mode
To enter the backlight setting mode,
the vehicle must be stopped. First,
push the "RESET/SELECT" button to
change the multi-function display to
show the current backlight setting "bL-
01", "bL-02", or "bL-03". Then push
the "RESET/SELECT" button for two
seconds to enter the backlight setting
mode. Next, push the "RESET/SE-
LECT" button to select the desired
backlight setting. Lastly, push the "RE-
SET/SELECT" button for two seconds
to confirm the setting and exit the
backlight setting mode.
6-7
Self-diagnosis mode
1
1. Error code display
This model is equipped with a self-di-
agnosis device for various electrical
circuits.
If a problem is detected in any of those
circuits, the engine trouble warning
light will come on and the display will
indicate an error code.
If the display indicates any error codes,
note the code number and have a
Yamaha dealer check the vehicle.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
ECA11591