Child Lock; To Activate The Child Lock; To Deactivate The Child Lock; Canceling The Programme - Beko WMY 91283 PTLB2 User Manual

4.3.12 Child Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid
any changes in a running programme.
C
You can switch on and off the machine with
the machine again, programme will resume from where it has stopped.

4.3.12.1 To activate the child lock:

Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display
on the panel, "CL On" light will turn on. You can release Auxiliary Function button 2 when this
warning is displayed.

4.3.12.2 To deactivate the child lock:

Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display on
the panel, "CL Off" light will turn on.

4.3.13 Canceling the programme

The programme is cancelled when the machine is turned off and on again. Press and hold On / Off
button for 3 seconds.
C
If you press
cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to open
the loading door since the water level in the machine is above the loading door opening, then turn the
Programme Selection

4.3.14 End of programme

End LED appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all
indicators are turned off.
Completed programme steps will be displayed if you press On / Off button.

4.3.15 Your machine features "Standby Mode".

After you switch on your machine with On-Off button, if no program is started or no other procedure
is performed at the selection step or no action is taken within approx. 10 minutes after the selected
program ends, your machine will switch to OFF mode automatically. Display and all indicators are
turned off. Selected programme data will be displayed if you press On / Off button. Before you start
the program, check the accuracy of your selections. If necessary, repeat them. This is not an error.
Washing Machine / User's Manual
On / Off
button when the Child Lock is enabled, the programme will not be cancelled. You should
Pump+Spin
knob to
On / Off
button when the Child Lock is active. When you switch on
programme and discharge the water in the machine.
49 / EN