Table of Contents
Advertisement
10.5 Field settings
The unit should be configured to match the installation environment (outdoor climate, installed options, etc.) and user demand.
A number of field settings are available. These settings are accessible and programmable through "FOR SERVICEMAN" in user
interface.
Powering on the unit
When power on the unit, "1%~99%" is displayed on the user interface during initialization. During this process the user interface
cannot be operated.
Procedure
To change one or more field settings, proceed as follows.
Temperature values displayed on the wired controller (user interface) are in °C.
NOTE
Keys
Go to the menu structure(on the home page
Navigate the cursor on the displa
►▼▲
Navigate in the menu structure
Adjust settings
Turn on/off the space heating/cooling operation or DHW
mode
Turn on/or off functions in the menu structure
Come back to the up level
Long press for unlock /lock the controller
Unlock /lock some functions such as DHW temperature
adjusting"
Go to the next step when programming a schedule in the
menu structure; and confirm a selection to enter in the
submenu of the menu structure.
52
Function
Advertisement
Table of Contents
