Installing The Drive In Your Computer; Preparation - Sony CDU601 User Manual

Installing the Drive in Your Computer

This section pr
CD-ROM drive unit into y our per sonal computer using the IDE Host
Adaptor (A TA-Compliant).
To connect the CDU601 directl
PC man ufacturer f or instruction.

Preparation

Y ou need the f ollo wing par ts and tools (these are not supplied with
the drive):
• A flat-blade screwdriver
• Four screws 3 mm in diameter and 6 mm in length.
• Two mounting rails if your computer has mounting tracks.
Unplug the computer and disconnect the cables attached to the back
to give y our self more r oom to w ork. Do not turn on the po
computer before completing the entire installation process.
ovides an e xample of instruction f
y to the PC' s IDE por t, consult y our
Installing the Drive in Your Computer
or installing the
wer of the
11