1 Service and Support
This chapter provides information on the service and support of FUNMAT PRO 310 desktop
industrial grade 3D printers (hereinafter referred to as "FUNMAT PRO 310", the "printer", the
"machine" or the "device"), as well as safety information and location of safety labels.
1.1 Service
If you have any questions not covered in this manual during the use of the printer, please contact
INTAMSYS Customer Support:
Region
Asia-Pacific
Europe, Middle East and Africa Support_EMEA@intamsys.com
America
1.2 Safety Instructions
The following basic security tips are intended to ensure safe installation, operation, and maintenance
of INTAMSYS equipment, and shall not be considered as comprehensive safety issues. The machine
is a safe and reliable industrial grade 3D printer. Make sure to inspect for and eliminate potential
hazards, if any, in the printer area before using this printer.
1.2.1 Hazard type
INTAMSYS recommends that all services be provided by qualified personnel. All personnel who
operate this printer or are near it shall understand the meaning of the following hazard classification
signs used in this manual.
[High Voltage Warning]: It indicates that high voltage exists. Keep away from
exposed circuits, and it is recommended to remove all ornaments.
[High Temperature Warning]: It indicates a high printer temperature. Be
cautious when working near components that are exposed to heat. Always wear
the safety gloves that come with the printer.
The temperature of the print head in the printer can reach up to 300℃.
The temperature of the printing platform in the printer can reach up to
160°C.
The temperature in the chamber of the printer can reach up to 100°C.
[Pinching Warning]: It indicates that your hands might be pinched between two
objects. One or more objects are moving in your working area.
Email
Support_APAC@intamsys.com
Support_America@intamsys.com
1
Need help?
Do you have a question about the FUNMAT PRO 310 and is the answer not in the manual?