Job Menu - Launch Creader Professional 129E User Manual

LAUNCH

4.3 Job Menu

It mainly includes the following function modules.
To configures the tool to operate as a professional diagnostic
Diagnose
tool.
A quick access to the I/M Readiness function of OBD II
Diagnosis. I/M refers to Inspection and Maintenance that
is legislated by the Government to meet federal clean-air
standards. I/M Readiness indicates whether or not the various
emissions-related systems on the vehicle are operating
I/M
properly and are ready for Inspection and Maintenance testing.
*Note: This function also can be done by performing "OBD II
(Diagnosis)" -> "I/M Readiness". For detailed operation, please refer
to Chapter 5.3.
This option presents a quick way to check for DTCs, isolate
the cause of the illuminated Malfunction Indicator Lamp (MIL),
OBD II check monitor status prior to emissions certification testing,
verify repairs, and perform a number of other services that are
emission-related.
Battery
Measures the current voltage of the vehicle's battery.
Voltage
To perform common repair & maintenance items, including
Oil lamp reset, Electronic parking brake reset, Steering angle
Reset
calibration, Tire pressure monitor system reset and Electronic
throttle position reset.
To update vehicle diagnostic software and APK.
Update
*Note: This function requires a stable network connection.
Includes Diagnostic report, Diagnostic record, Feedback and
Data
DTC library etc.
To make some system settings, including Network setup,
Settings
Email and Brightness etc.
Professional 129E User Manual
EN
11