Advertisement
Quick Links
O W N E R ' S
1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before
assembling or ordering parts.
3. If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together.
Leave bolts slightly loose until you are instructed to tighten them.
4. To make assembly as easy as possible, place all parts of the table tennis in a cleared area and
remove the packaging material. Organize all parts as per parts identifier in the assembly manual.
Do not dispose of the packing material until assembly is completed.
5. Avoid scratching table tennis top and metal tube parts during the assembly process.
6. Assemble product on clean, level and flat surface.
7. Take time to correctly orientate parts exactly as per each assembly diagram.
8. Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
CAUTION:
Thank you for buying our product. We try hard to ensure that our products are of high quality and free of problems, such as
Manufacturing defects or missing parts. However, if you have any problems with your new product, please DO NOT RETURN IT
TO THE STORE!
Please Do Not Return This Product To The Store!
Contact Escalade Sports customer service department at:
R
Phone: 1-866-873-3528
Fax:
1-866-873-3533
E-mail: tabletennis@escaladesports.com
Please provide model number and/or part number of the product and/or part when you call or write. These numbers can be found on the
product, packaging, and/or in this Owner's Manual.
Please visit our website at: www.escaladesports.com
ON-LINE TROUBLE SHOOTING
ON-LINE PARTS REQUESTS
ADDITIONAL ESCALADE SPORTS PRODUCT INFORMANTION
Escalade Sport products may be manufactured and/or licensed under the following patents.
R
6120397 , 5816957 , 5769744 , 5119741 , 4911085 , 4717157 , D460140 , D420563
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
READ ASSEMBLY, OPERATING AND SAFETY INSTRUCTIONS
CAREFULLY! AT LEAST TWO ADULTS ARE NEEDED TO PUT
THIS TABLE TOGETHER!
Toll-Free!
Mailing Address
Toll-Free!
(correspondence only):
Escalade Sports
PO Box 889, Evansville, IN 47706
TECHNICAL ASSISTANCE
FREQUENTLY ASKED QUESTIONS
R
Be sure to write your model number and serial number here
for future reference. You can find these numbers printed on
the bottom of the table.
MODEL NO.: T8755W/F
DATE CODE : CPSIA#2-T8755W/F-_______-SY
PURCHASE DATE : _______________________
M A N U A L
Physical Location:
Escalade Sports
817 Maxwell Ave.
Evansville, IN 47711
V.2
2021 Escalade Sports
R
C
Advertisement
Related Manuals for Stiga T8755W/F
Summary of Contents for Stiga T8755W/F
- Page 1 Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL NO.: T8755W/F DATE CODE : CPSIA#2-T8755W/F-_______-SY PURCHASE DATE : _______________________ O W N E R ’ S M A N U A L 1.
-
Page 2: Care And Maintenance
CARE AND MAINTENANCE You have purchased a quality product that will give you years of enjoyment. By following these simple maintenance steps, you will add to the life of your new table. THE TABLE TOP The top (playing surface) of your table is made of Mid-Density Board. Like all products made of wood, it can be affected by atmospheric changes in both temperature and humidity. - Page 3 HARDWARE IDENTIFIER (To Scale) H1 - 8 mm x H2 - 8 mm x H3 - 8 mm x Hex Head Bolt Hex Head Bolt Hex Head Bolt (8 pcs) (8 pcs) (6 pcs) H4 - 8 mm x H6 - 8 mm Nylon H7 - Plastic Hex Head Bolt H5 - 8 mm x 20 mm...
-
Page 4: Parts Required
IMPORTANT NOTE: Place table half top with playing surface face down on a CLEAN flat surface for ease of correct assembly and to prevent any scratches or blemishes to the playing surface. PARTS REQUIRED 1 pc P1 Table Tennis Table Top and Frame Assembly 2 pcs P2 Leg 4 pcs H2 8x40mm Hex Head Bolt 4 pcs H6 8mm Nylon Lock Nut... - Page 5 PARTS REQUIRED P3 Leg Support Tube 2 pcs H3 8x45mm Hex Head Bolt 2 pcs H5 Flat Washer 1 pc STEP 3: Install P3 Tube using H3 Bolts with H5 Flat Washers as shown in FIGURE 3. Tighten, but do not overtighten on this step. Thread P5 Leg Levelers assembly from STEP 2 onto the P2 Legs as shown in FIGURE 3.
- Page 6 PARTS REQUIRED 8 pcs H1 8x20mm Hex Head Bolt 16 pcs H5 Flat Washer 8 pcs H6 Lock Nut STEP 5: Connect two Half Table Top using H1 Bolts with H5 Flat Washers and H6 Lock Nuts as shown in FIGURE 5 and DETAIL A. Tighten All Hardware on this step.
- Page 7 T8755SY-H1 T8755SY-H2 T8755SY-H3 8 mm x 45 mm Hex Head Bolt T8755SY-H4 8 mm x 70 mm Hex Head Bolt T8755SY-H5 8 mm x 20 mm Flat Washer T8755SY-H6 8 mm Nylon Lock Nut T8755SY-H7 Plastic Step Washer T8755SY-H8 12 mm x 50 mm Hex Head Bolt T8755SY-H9 12 mm x 25 mm Flat Washer T8755SY-H10...
- Page 8 3 YEARS LIMITED WARRANTY This consumer warranty extends to the original consumer purchase of any ESCALADE SPORTS Product (hereinafter referred as the “Product”). WARRANTY DURATION: This Product is warranted to the original consumer purchase of a period of three (3) years from the original purchase. WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser that any Product of its manufacture is free from defects in material and workmanship when used for the intended purpose under normal use and conditions.
Need help?
Do you have a question about the T8755W/F and is the answer not in the manual?
Questions and answers