Download Print this page

Advertisement

Quick Links

O W N E R ' S
1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before
assembling or ordering parts.
3. If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together.
Leave bolts slightly loose until you are instructed to tighten them.
4. Tools required for assembly: Wrench H9 (included).
5. To make assembly as easy as possible, place all parts of the table tennis table in a cleared area and
remove the packaging material. Organize all parts as per parts identifier in the assembly manual. Do
not dispose of the packing material until assembly is completed.
6. Avoid scratching table tennis top and metal tube parts during the assembly process.
7. Assemble product on a clean, level and flat surface.
8. Take time to correctly orientate parts exactly as each assembly diagram.
9. Save this manual in the event that the manufacturer has to be contacted for replacement parts.
READ ASSEMBLY, OPERATING AND SAFETY INSTRUCTIONS CAREFULLY! AT LEAST FOUR
ADULTS ARE NEEDED TO PUT THIS TABLE TOGETHER!
STIGA® is a registered trademark of STIGA Sports AB, a Swedish company known for its high-quality table tennis equipment. Escalade
Sports is a long-term licensing and manufacturing partner of STIGA, holding a licensing agreement to produce and distribute STIGA-branded
table tennis tables, paddles, nets, balls, and related products across North America. This partnership enables Escalade Sports to bring
STIGA's premium products to North American consumers while maintaining the brand's commitment to quality and innovation.
Thank you for buying our product. We ensure that our products are of high quality and free of problems,
such as manufacturing defects or missing parts. However, if you have any problems with your new
DO NOT RETURN PRODUCT TO THE STORE!
P
h
o
n
: e
1
8 -
0
0
4 -
6
7
1 -
Fax:
1-866-873-3533
E-mail: tabletennis@escaladesports.com
Please provide model number and/or part number of the product and/or part when you call or write. These numbers can be
found on the product, packaging, and/or in this Owner's Manual.
Please visit our website at: www.stigaus.com for:
Troubleshooting, Parts Requests, Technical Assistance and FAQs.
Escalade Sport products may be manufactured and/or licensed under the following patents.
R
6120397 , 5816957 , 5769744 , 5119741 , 4911085 , 4717157 , D460140 , D420563
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
product, please DO NOT RETURN IT TO THE STORE!
Contact STIGA US Customer Service Department at:
4
2
1
o T
l l
F -
e r
! e
Toll-Free!
Be sure to write your model number and serial number
here for future reference. You can find these numbers
printed on the bottom of the table.
MODEL NO.: T8910W
DATE CODE :
PURCHASE DATE : __________________
M A N U A L
Mailing Address
(correspondence only):
Escalade Sports
R
PO Box 889, Evansville, IN 47706
____________
CPSIA#2-T8910W-
Physical Location:
817 Maxwell Ave.
Evansville, IN 47711
VERSION# 02
2025 Escalade Sports
C
-DE
R

Advertisement

loading
Need help?

Need help?

Do you have a question about the T8910W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Stiga T8910W

  • Page 1 ADULTS ARE NEEDED TO PUT THIS TABLE TOGETHER! STIGA® is a registered trademark of STIGA Sports AB, a Swedish company known for its high-quality table tennis equipment. Escalade Sports is a long-term licensing and manufacturing partner of STIGA, holding a licensing agreement to produce and distribute STIGA-branded table tennis tables, paddles, nets, balls, and related products across North America.
  • Page 2 First Time Battery Installation: Remote Control On the back of the remote control, slide the battery cover in the direction of the arrow to remove it. Insert 2 AAA batteries in the correct orientation according to the +/- labels inside the remote control. Reinstall battery cover on the back of the remote control.
  • Page 3 BOX 1 PARTS LIST (NOT ACTUAL SIZE) - 3 -...
  • Page 4 BOX 2 PARTS LIST (NOT ACTUAL SIZE) - 4 -...
  • Page 5 BOX 2 PARTS LIST (NOT ACTUAL SIZE) - 5 -...
  • Page 6 BOX 2 PARTS LIST (NOT ACTUAL SIZE) - 6 -...
  • Page 7 H A R D W A R E L I S T ( A C T U A L S I Z E ) M10 HEX LOCK NUT M8 HEX LOCK NUT - 7 -...
  • Page 8 STEP 1 CAUTION AT LEAST TWO CAPABLE ADULTS ARE REQUIRED TO COMPLETE THIS STEP. - 8 -...
  • Page 9 HARDWARE NEEDED (ACTUAL SIZE) STEP 2 M10 HEX LOCK NUT NOTICE: Do not tighten hardware at this time. - 9 -...
  • Page 10 CAUTION AT LEAST TWO CAPABLE ADULTS ARE REQUIRED TO COMPLETE THIS STEP. 1. Lay down a section of shipping carton Tighten to protect leg assembly. 2. Roll leg assembly onto it’s side. 3. Tighten hardware from Step 2 4. Roll leg assembly back to upright position. - 10 -...
  • Page 11 HARDWARE NEEDED (ACTUAL SIZE) STEP 3 NOTICE: Do not tighten hardware at this time. - 11 -...
  • Page 12 HARDWARE NEEDED (ACTUAL SIZE) STEP 4 NOTICE: Do not tighten hardware at this time. NOTICE: Turn counterclock- wise to remove the protective cap. Total of 4 pieces. - 12 -...
  • Page 13 HARDWARE NEEDED (ACTUAL SIZE) STEP 5 M8 HEX LOCK NUT NOTICE: Do not tighten hardware at this time. - 13 -...
  • Page 14 HARDWARE NEEDED (ACTUAL SIZE) STEP 6 M10 HEX LOCK NUT NOTICE: Do not tighten hardware at this time. - 14 -...
  • Page 15 HARDWARE NEEDED (ACTUAL SIZE) STEP 7 M8 HEX LOCK NUT NOTICE: Do not tighten hardware at this time. - 15 -...
  • Page 16 STEP 8 NOTICE: Use wrenches (H9) to tighten the bolts and nuts marked in the flow 1 to 3 details. Tighten the bolts and nuts in step 7. Total of 4 sets. NOTE Tighten the bolts and nuts in step 3. Total of 8 sets.
  • Page 17 STEP 9 NOTICE: Use the ruler (P18) to measure the height of the frame at 735mm as shown. Measure the 8 points marked below. The height of the frame is OK within the range of this slot. Rotate the Adjuster (P11) to adjust the frame height.
  • Page 18 STEP 10 Tighten the bolts in step 4. Total of 4 sets. Tighten the bolts in step 6. Total of 4 sets. - 18 -...
  • Page 19 HARDWARE NEEDED (ACTUAL SIZE) STEP 11 CAUTION AT LEAST FOUR CAPABLE ADULTS ARE REQUIRED TO COMPLETE THIS STEP. NOTICE: There are LED lights under and around the table. Carefully move the table to prevent pressure on the light strips . Turn counterclockwise to remove the protec- tive cap.
  • Page 20 STEP 12 Plastic pad NOTICE: Use FOAM TAPE (P16) to attach the receiver(P13) to the tube, make sure it is located inside the plastic pad. - 20 -...
  • Page 21 STEP 13 - 21 -...
  • Page 22 STEP 14 - 22 -...
  • Page 23 STEP 15 NOTICE: Use a ruler (P12) to see if the height of the net is standard, and adjust the height by rotating the knob. - 23 -...
  • Page 24 STEP 16 WARNING DO NOT CLIMB, STAND OR JUMP ON TABLE! SERIOUS OR FATAL INJURY MAY RESULT! THIS IS NOT A TOY! The height of the table is OK within the range of this slot. NOTICE: Rotate the Adjuster (P11) to adjust the table height.
  • Page 25: Care And Maintenance

    CARE AND MAINTENANCE You have purchased a quality product that will give you years of enjoyment. By following these simple maintenance steps, you will add to the life of your new table. THE TABLE TOP The top (playing surface) of your table is made of id- ensity oard.
  • Page 26 T8910 TABLE TENNIS TABLE SPARE PARTS Key# Part No. Description T8910DE-H1 M10 x120 mm Hex Head Bolt M10 x 75 mm Hex Head Bolt T8910DE-H2 T8910DE-H3 M8 x 70 mm Hex Head Bolt T8910DE-H4 M8 x 20 mm Hex Head Bolt M10 Hex Lock Nut T8910DE-H5 M10 x 25 mm Flat Washer...
  • Page 27 3 YEARS LIMITED WARRANTY This consumer warranty extends to the original consumer purchase of any ESCALADE SPORTS Product (hereinafter referred as the “Product”). WARRANTY DURATION: This Product is warranted to the original consumer purchase of a period of three (3) years from the original purchase. WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser that any Product of its manufacture is free from defects in material and workmanship when used for the intended purpose under normal use and conditions.