Use Of Nozzle; Clean And Care; Troubleshooting - Magio MG-333 Instruction Manual

- The brush attachment improves steam penetration to achieve faster and better steaming result
on thick and heavy garment such as coat and jacket. Brush is to be used together with steam by pressing
the steam trigger and slowly moving the bristles along the garments.

Use of nozzle

It is recommended to use the nozzles when steaming delicate fabrics, such as silk, to reduce
the risk of water getting into the fabric when steaming. Also, the nozzles can be used to clean
clothes from lint, wool and dust.
Always unplug the steamer before you attach or detach the brush attachment. Be careful,
the steamer head may still be hot.

Clean and care

1. Unplug the appliance.
2. Allow the device to cool down.
3. Always empty the water tank after use, to prevent scale build-up. Rinse the water tank to remove
any deposits.
4. Wipe any deposits off the steamer head with a damp cloth and a non-abrasive liquid cleaning agent.
Warning!
»
Do not use scouring pads, abrasive cleaning agents or aggressive liquids such as alcohol,
petrol or acetone to clean the appliance.
»
Don't immerse the unit into water.
»
Don't use sharp or abrasive to clean the appliance.

Troubleshooting

Problem
The steamer does not
heat up
The steamer does not
produce steam
Water spills from the
water tank
The steamer is producing
a loud humming or
pumping sound
The steamer does not
seem to be removing
creases easily
Avoiding discolouring of
metal accessories on the
garment
Check main plug is inserted correctly.
Check power supply.
Check power button.
Check the water level and the water tank inlet cover is properly
covered.
Press the steam activation button harder.
Hold the steamer in an upright position.
Make sure water is not over the MAXIMUM level.
Make sure water tank inlet cover is properly closed.
Always use the steamer in an upright position as per the
operating instructions.
Check water level; if there is no water or it is low , refill the water
tank.
Hold the steamer in an upright position and stretch the fabric
downward to ensure best results.
Do not directly hover the garment steamer over the metal
accessories.
Use caution and steam around the metal accessories.
Possible solution
EN
18