Setup In A Macintosh Environment; Mac Os X (V10.3.3 To 10.4) - Sharp MX-2700N Quick Start Manual

SETUP IN A MACINTOSH
3
ENVIRONMENT
This section explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer
driver settings. The procedures vary by operating system version.
☞
MAC OS X (v10.3.3 TO 10.4): this page
☞
MAC OS X (v10.2.8): page 33
☞
MAC OS X (v10.1.5): page 36
☞
MAC OS 9.0 TO 9.2.2: page 38
• The PS3 expansion kit is required to use the machine as a printer in a Macintosh environment. In addition,
the printer function can only be used when the machine is connected to a network. The printer function
cannot be used when the machine is connected with a USB cable.
• The scanner driver and PC-Fax driver cannot be used in a Macintosh environment.

MAC OS X (v10.3.3 TO 10.4)

1
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows "Disc 2" on the
front of the CD-ROM.
2
Double-click the [CD-ROM] icon (
the desktop.
3
Double-click the [MacOSX] folder.
4
Double-click the [Version 10.3] folder.
If you are using Mac OS X v10.4, double-click the
[Version 10.4] folder.
30
5
Double-click the [MX-PBX1] icon (
6
Click the [Continue] button.
) on
).