Replacing The Batteries - Fluke MicroScanner Series Getting Started Manual

Replacing the Batteries

 
To select PoE mode, press or until PoE
appears on the display. In PoE mode, the tester
solicits PoE power on pairs 1,2-3,6 and 4,5-7,8.
The tester may activate a PoE source and will
not be damaged by PoE power.

If PoE power is detected, appears above

the powered pairs. The may blink as the
PoE source turns the power on and off.
In twisted pair test mode, a flashing PoE mode
indicator means that PoE power may be
available. To verify the presence of a PoE
source, switch the tester to PoE mode.
Replacing the Batteries
The batteries last for about 20 hours of typical
use.
EGS28.EPS
12
GlobalTestSupply
www. .com
Find Quality Products Online at: sales@GlobalTestSupply.com