High Capacity Stacker-J1 - Canon imagePRESS V900 Manual

Canon

7.22 High Capacity Stacker-J1

IMPORTANT
The High Capacity Stacker-J1 does not support envelope sizes smaller than 5.5"
x 7.2" (such as COM10 and Monarch), even in pass-through (bypass) mode.
Item
Required Equipment
Bypass
Paper
Top Tray
Sizes
Stack Tray
Paper Weight
Stack Capacity
Power Source
Maximum Power
Consumption
Dimensions (W x D x H)
Weight
Optional Equipment
52 Depth is 49.2" (1,250 mm) when stack tray is ejected. Width is 44.1" (1,121 mm) and height is 49.6" (1,260 mm) when the High
Capacity Stacker Long Sheet Tray is attached.
Revision 2 imagePRESS V900/V800/V700 Customer Expectations Document
imagePRESS V900/V800/V700 Customer Expectations Document
Long Beltstacker BST6800 or Short Beltstacker 6900 when using with the
SDD BLM300C Professional Booklet Maker and the High Capacity
Stacker-J1 the DFD connection
5.5" x 7.2" to 13" x 51.2" (139.7 mm x 182 mm to 330.2 mm x 1300 mm)
5.5" x 7.2" to 13" x 51.2" (139.7 mm x 182 mm to 330.2 mm x 1300 mm)
5.5" x 7.2" to 13" x 19.2" (139.7 mm x 182 mm to 330.2 mm x 487.7 mm)
See the Specialty Media Handling Guide for specific information
Approximately 6,200 sheets maximum, including the top tray, 20 lb bond (80
g/m )
2
90 – 264 V AC, 47-63 Hz, 10 A
220W
35.4" x 29.3" x 44.9" (899 mm x 745 mm x 1,141 mm)
Approximately 264 lb (120 kg)
PowerLift
Specifications
52
Page 93