Paper Handling And Storage - Canon imagePRESS V900 Manual

Canon

15.4 Paper Handling and Storage

• The permissible humidity range for paper storage is 30% to 70% (with a room
temperature of 68°F to 80.6°F (20°C to 27°C)). Storing paper in a location that
does not meet these specifications may affect paper feeding and image quality.
• Only use paper that has fully acclimatized to the environment in which the machine
is installed (minimum 24 hours). Using paper that has been stored in a different
environment (with a different temperature and humidity), may cause paper jams or
result in poor print quality.
• We recommend using paper immediately after opening the package. Rewrap any
remaining paper in its original package, and store it on a flat surface.
• Before loading paper, make sure to fan the sheets thoroughly so that air runs
through the sheets, as shown in the diagrams below.
• When you cut paper, the cutting sides of the paper must be made smooth. Use an
abrasive to make the four cutting sides smooth. Otherwise, streaks may appear on
the image, paper feeding may be affected, part life may be reduced, or service
calls may increase. Make sure to put the paper on a flat table to use the abrasive,
and move the abrasive perpendicular to the paper approximately three times.
Revision 2 imagePRESS V900/V800/V700 Customer Expectations Document
imagePRESS V900/V800/V700 Customer Expectations Document
Page 137