Product Overview - Projecta INTELLI-START IS3000 Instructions Manual

AUTOMATIC CELL-BALANCED CHARGE CONTROL
• Automatically stops charging when the battery is fully charged. This initiates maintenance mode,
keeping the battery fully charged and ready for use. You can leave the unit on charge indefinitely
without the risk of overcharging.
DOCKING STATION FOR 240V AC
• A slim and stable docking station is provided to allow the jump starter to be charged from a 240V AC
outlet.
SOLDERED HIGH CURRENT CONNECTIONS
• All wired connections within jump starter are crimped and bolted to ensure maximum reliability and
current output.
REVERSE POLARITY PROTECTION & ALARM
• Prevents sparking from accidental reverse connection.
• The jump starter displays and sounds an alarm when the jump starters clamps are connected
incorrectly. Refer to "ERROR AND ALARM MESSAGES" section.
OVER-TEMPERATURE PROTECTION
• The jump starter has different layers of temperature protection. Should the unit overheat by continuous
or numerous jump starts, the unit will shut off automatically.
OVER-VOLTAGE PROTECTION
• Before the jump starter activates the jump start function, it will sound an alarm if the vehicle battery is
higher than 30V DC.
SURGE PROTECTION
• The jump starter features built-in surge protection so you can safely jump start vehicles with EFI
(electronic fuel injection) and computer management systems.

PRODUCT OVERVIEW

ISCD3500 AC/DC Charging Dock
ISCA3500 15VDC 3A AC Charging
Adapter
5