Adr Advanced Configuration; Factory Reset (0Xec); Advanced Configuration (0Xfc) - Multitech RBS3010NA0EBN0 User Manual

COMMON MESSAGES

ADR Advanced Configuration

The ADR configuration message overrides the LoRaWAN ADR_ACK_LIMIT and ADR_ACK_DELAY parameters.
Byte
0x00
0x01
0x02
0x03
For additional details with usage to ADR_ACK_LIMIT and ADR_ACK_DELAY, refer to LoRaWAN Link Layer
Specification v1.0.4 - Section 4.3.1.1: Adaptive data-rate control in frame header.

Factory Reset (0xEC)

Restores all setting to factory defaults. Does not preserve any custom configuration.
In US915, the device returned the device information message.
In EU868, the device returns that downlink confirmation.

Advanced Configuration (0xFC)

Use this command for advanced configuration parameters that apply to all sensor types. The advanced
configuration command is defined in the following table.
Byte
0x01
0x02
Port Number
Byte 0x01 of the advanced configuration command changes the uplink port per the LoRaWAN protocol. The default
port is 2, and a value of 0 in this field means to leave it at the default.
This feature is available in firmware v1.4 and above.
Link Quality Check Period
Setting this register causes the device to ping the network server periodically with a requested ack. Typically used
with unconfirmed messages, this feature creates a periodic confirmed message and looks for the ack to ensure the
device is still connected.
The following table shows this byte's encoded bit definitions.
Available in firmware v2.0 and above.
Bit 7 Bits 6:0
0 Period defined in hours (1-127 hours).
1 Period defined in minutes (1-127 minutes)
20
Description
ADR_ACK_LIMIT value when running in Unconfirmed Mode. The default value is 64.
ADR_ACK_DELAY value when running in Unconfirmed Mode. The default value is 32.
ADR_ACK_LIMIT value when running in Confirmed Mode. The default value is 2.
ADR_ACK_DELAY value when running in "Confirmed Mode". The default value is 1.
Description
Port number
Link quality check period
Radio Bridge LoRaWAN
®
Wireless Sensor Air Temperature Humidity Sensor User Guide