Specifications - Emotiva BASXMR1-L User Manual

BasX MR1

Specifications

Audio Performance - Analog Audio Outputs
Rated Output Voltage:
+6 dBV (2 VRMS)
Frequency Response:
20 Hz to 20 kHz +/- 0.05 dB
Total Harmonic Distortion:
< 0.0025% @ 1 kHz
< 0.05% from 20 Hz to 20 kHz
Signal to Noise Ratio:
> 115 dB @ 1 kHz
Crosstalk:
< 85 dB @ 10 kHz
Audio Performance - Speaker Outputs (Internal Amplifiers)
Power Output Per Channel; ONE channel driven:
140 watts RMS / channel @ 8 Ohms; 200 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; TWO channels driven:
130 watts RMS / channel @ 8 Ohms; 180 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; FIVE channels driven:
110 watts RMS / channel @ 8 Ohms; 140 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; SEVEN channels driven:
100 watts RMS / channel @ 8 Ohms; 120 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Output Per Channel; NINE channels driven:
85 watts RMS / channel @ 8 Ohms; 100 watts RMS / channel @ 4 Ohms; < 0.1% THD
Power Bandwidth (at rated power; 8 Ohm load):
20 Hz to 20 kHz (+ 0 / - 0.15 dB) or better.
Broad Band Frequency Response:
5 Hz to 80 kHz (+ 0 / - 3 dB).
THD + noise:
< 0.02% (A-weighted); at rated power; 1 kHz; 8 Ohms.
Signal to Noise Ratio (8 Ohm load):
> 105 dB or better; referenced to rated power (A-weighted).
Minimum Load Impedance: 4 Ohms (one 4 Ohm or two paralleled 8 Ohm speakers.)
Damping Factor: >
9.2 Channel Cinema Receiver
L
400.
Page 37