Emotiva BASXMR1-L User Manual page 38

BasX MR1 9.2 Channel Cinema Receiver
L
SETUP - OPTION
This menu gives you access to several configuration options for various features on the MR1L.
Startup State - This option allows you to configure how the MR1L starts up when AC power
is applied to the unit. The MR1L can be configured to start up On, or in Standby, or to start in
whatever state it was in when it was powered Off.
Volume Options - This is where you can configure the Power On Volume, Maximum Volume, and
Volume Step settings for the MR1L. You can also configure whether the MR1L displays Volume as a
number from 0-80 (with 80 the highest volume) or as Real Gain (expressed in -dB).
HDMI Options - This menu offers several options related to HDMI operation. Options include
which HDMI Outputs are enabled, whether the MR1L will continue to pass video to the TV when
in Standby, some detailed choices about how the MR1L responds to HDMI-CEC commands from
other devices, and allows you to configure whether specific HDMI inputs support Enhanced HDMI
or not. (Most users will not need to use these options unless instructed to by Emotiva Technical
Support.)
Information Display - This is where you can configure how the on-screen display (OSD) appears
and set the default brightness for the front panel display.
No Signal Standby - This is where you can configure how long the MR1L will wait before
switching into Standby when it sees no input signal on the selected input.
Trigger Output - This is where you can configure the default operation of the Trigger Output on
the MR1L. You may configure the Trigger Output to remain Off, to remain On when the MR1L is
turned On, or to be controlled according to the Trigger option settings for each individual input.
Unit - This is where you configure your MR1L to display various values in Metric or Standard
notation. The default is Standard.
U Driver Log - This options turns on special system diagnostic logs. (You should NOT enable this
option unless instructed to do so by Emotiva Technical Support.)
SETUP - SAVE AND RECALL
This menu enables you to save the current configuration settings on your MR1L, restore previously
saved settings, and reset the unit to its factory default configuration.
Save to Backup - Saves the current configuration of the MR1L. Settings are saved to internal
memory inside the MR1L.
Load From Backup - Loads settings that have previously been saved in the MR1L.
Factory Reset - Resets your MR1L to its factory default settings.
Note: Configuration settings are saved to an internal memory location inside the MR1L. Saved
settings are retained when you turn off the MR1L or do a Factory Reset.
Page 32