Emotiva BASXMR1-L User Manual page 33

9.2 channel cinema receiver
Table of Contents

Advertisement

BasX MR1
9.2 Channel Cinema Receiver
L
THE SOURCE MENU
You can use the Source Menu to select your Input Source.
Use the Up and Down arrows to move the highlight to the input you wish to select.
Press OK to accept your choice.
(After you accept your choice your new selection will be highlighted in RED.)
THE SOUNDFIELD MENU
By default the MR1L will choose what Sound Field to use to play each source based on the
number of channels and audio format of the incoming audio signal. This menu enables you to
temporarily override the default choice for your current audio content.
Remember - When this option is Off the option you choose is considered to be temporary. When
this is set to On the MR1L will attempt to use the option you choose the next time it receives a
similar source signal.
THE TRIMS MENU
The Trims Menu enables you to set individual trim levels for each speaker channel and configure
Dolby Range Control and Lipsynch Delay options.
Channel Levels - The Trims Menu allows you to individually set the level of each speaker.
Remember Channel Volume - When this is set to OFF Channel Level settings are temporary.
When this is set to On the Trim Level settings are retained when the MR1L is powered off.
DRC - Allows you to set Dolby Range Control to On, Off, or Auto.
Lipsynch - Allows you to manually enter a value for Lip Synch Delay. The default setting is Auto,
which is the best choice for most systems.
THE EMO-Q MENU
The EMO-Q Menu gives you access to the EMO-Q Advanced Automatic Room Correction System
in the MR1L.
EMO-Q Calibration - This option engages the EMO-Q Automatic Room Correction System, which
will automatically measure your room, and your system, and configure the MR1L to deliver the
best possible sound quality.
Individual Test - This option allows you to use the measurement capabilities of the EMO-Q
Automatic Room Correction System to take test measurements on individual channels.
REFER TO THE EMO-Q ADVANCED AUTOMATIC ROOM CORRECTION SECTION FOR MORE
DETAILS ABOUT RUNNING EMO-Q.
Page 27

Advertisement

Table of Contents
loading

Table of Contents