Emotiva BASXMR1-L User Manual page 23

BasX MR1
12. Speaker Outputs
These are the Speaker outputs on the MR1L.
Note: The Main 13.2 Channel Analog Outputs are always active and remain active when
you are using the main Speaker Outputs. You MAY use both outputs if you wish to connect a
combination of regular loudspeakers and external amplifiers to the MR1L.
13. Main HDMI Outputs
These are the main HDMI Outputs on the MR1L and should be connected to your TV and/or
projector. Both HDMI outputs carry the same video signal, and the On-Screen Display Menu
will be visible on both, but HDMI #1 is considered to be the primary output, and only HDMI #1
supports ARC and eARC.
Note: ONLY HDMI OUTPUT #1 SUPPORTS ARC AND ENHANCED ARC (eARC). Therefore, if you
plan to use ARC or eARC with a certain TV, then that TV MUST be connected to HDMI Output #1.
Note: ARC / eARC is a separate AUDIO input on the MR1L. If you wish to listen to audio from an
App on your TV via ARC or eARC then you MUST select the ARC / eARC Input on the MR1L.
(The MR1L will NOT switch to playing the ARC or eARC signal automatically when it is present.)
Note: Your TV or projector will only recognize the MR1L as being capable of receiving eARC
audio when eARC is the SELECTED input on the MR1L. Therefore, when you use eARC, you
should set the MR1L to its eARC input before attempting to select eARC as the audio output
device on your TV.
NOTE: The MR1L has a special feature that enables you to select which HDMI Outputs are
active. This feature is provided to prevent compatibility issues that sometimes arise with
certain TV sets and projectors. Refer to the Special Features section for more details.
14. Main HDMI Inputs
These are the main HDMI Inputs on the MR1L. Use these to connect your HDMI sources. All six
HDMI Inputs on the MR1L support HDMI 2.0b and HDCP 2.2, with full support for 4k UHD video up
to 4k/60, including HDR, HDR+, and Dolby Vision.
15. Power Cable Receptacle
The MR1L uses a standard removable power cable. A high quality commercial power cable is
provided with your MR1L.
16. AC Power Switch And Line Voltage Indicators
The AC Power Switch turns the main AC power to the MR1L On and Off. When this switch is Off,
no controls operate, and the MR1L cannot be turned On from the front panel or with the remote
control. The MR1L automatically detects and switches to the proper line voltage and the Line
Voltage Indicators show you which voltage the MR1L has configured itself for.
9.2 Channel Cinema Receiver
L
Page 17