SPECIFICATION ..................................9 & C ..............................9 PECIFICATIONS APACITIES PARTS LIST ..................................10 .......................... 10 POINT RACTOR EVELER SSEMBLY TMG-TLL72 P ................................ 10 ARTS TMG-TLL84 P ................................ 11 ARTS TMG-TLL96 P ................................ 11 ARTS www.tmgindustrial.com 2 / 11 TOLL FREE: 1-877-761-2819...
Your Safety YOU are responsible for the SAFE operation and maintenance of your TMG Tractor Land Leveler. YOU must ensure that you and anyone else who is going to use, maintain or work around the Tractor Land Leveler be familiar with the using and maintenance procedures and related SAFETY information contained in this manual.
- Wet weather gear - Hearing Protection 6. Install and secure all guards before starting. 7. Wear suitable ear protection for prolonged exposure to excessive noise. 8. Turn machine off, stop and disable engine, remove ignition key and place in your pocket, set park brake and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging.
10. In addition to the design and configuration of this implement, including Safety Signs and Safety Equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and machine manuals.
Safety Decals Preparation Never use the machine until you have read and completely understand this manual, the Tractor Operator's Manual and each of the Safety Messages found on the safety signs on the Tractor and machine. Personal protection equipment including hard hat, safety glasses, safety shoes, and gloves are recommended during assembly, installation, operation, adjustment, maintaining, repairing, removal, cleaning, or moving the unit.
Make sure there is plenty of ventilation. Never operate the engine of the towing vehicle in a closed building. The exhaust fumes may cause asphyxiation. Before working on this machine, shut off the engine, set the brake, and turn fuel valve off. Never work under equipment unless itis blocked securely.
MAINTENANCE Before Every Use Check that all fasteners (nuts, bolts, pins, keepers) are in their right place and are tight. Inspect and replace any worn, torn or missing safety decals. Every Week Check the condition of the ripper and blade, Order parts if the cutting edge or points are becoming worn and replace as soon as possible.
Need help?
Do you have a question about the TMG-TLL84 and is the answer not in the manual?
Questions and answers