Reset All - Toshiba DVR20KB Owner's Manual

E9TK4BD_EN.book Page 69 Wednesday, January 6, 2010 10:05 PM
DVB Setting
Setup General Setting DVB Setting
You can make settings of the digital tuner from the DVB
Setting.
A Adult Lock
B
Language
C
About
A Adult Lock (Default: OFF)
DVB
You can set "Adult Lock" to "ON" or "OFF" and also
change Pincode.
1
Select "ON" or "OFF" using [K L], then
press [ENTER OK].
Adult Lock
ON
OFF
2
To set "Adult Lock" to "ON":
1) Enter your desired Pincode using
[the Number buttons], then press [ENTER OK].
2) For confirmation, enter the Pincode again using
[the Number buttons] then press [ENTER OK].
To set "Adult Lock" to "OFF":
Enter the Pincode using [the Number buttons].
• While entering the Pincode, use [0] or [CLEAR] to
clear the numbers once entered.
Note
• Once "Adult Lock" has been set to "ON", Pincode will be
required in order to view the locked channels or make
the timer recording of them, and when you try to execute
the "Auto Tuning" for DVB or "Edit Channels".
• If you forget the Pincode, press [4], [7], [3], [7] to cancel
the Pincode.
B Language
DVB
Language
Audio
Subtitle
Data Service
Audio : Set the Audio language.
Subtitle : Set the Subtitle language.
Data Service : Set the Digital Teletext language.
Note
• The Audio and Subtitle setting may not be available for
some broadcast.
• To change the audio language, refer to "Multi Audio" on
page 26.
• To display the subtitle or choose the subtitle language,
refer to "Subtitle" on page 26.
C About
DVB
You can check the current DVB system software version
of this unit.

Reset All

Setup General Setting Reset All
Select "Yes" using [K L], then press [ENTER OK].
Reset to factory default?
Yes
No
"Are you sure?" will appear. Select "Yes" using [K L], and
then press [ENTER OK].
Note
• The settings listed below will remain unchanged even after
resetting to the factory default.
- Clock setting
- Channel setting
- Parental lock setting
- DivX ® VOD code
- Timer programmes
- DVB setting
69
EN