Fisher & Paykel WH1160F Installation Manual page 3

SAFETY AND WARNINGS
!
Electric Shock Hazard
Failure to follow this advice may result in
electric shock or death.
• If you are using an extension cord or
a portable electrical outlet device (eg
multi-socket outlet box), ensure that it is
positioned so that it does not come into
contact with water or moisture.
READ AND SAVE THIS GUIDE
Installation
For guidance on how to install your product, please refer to installation instructions
z
contained in this document.
Install the washer on a solid and level floor surface ensuring it has at least 20 mm
z
clearance on each side. The washer must not be installed on any textured floor coverings
(eg carpet, rugs).
This washer must not be installed or operated on a plinth.
z
Ensure the installation provides accessibility to the plug or incorporate a switch in the
z
fixed wiring in accordance with the wiring rules to allow disconnection of the appliance
from the supply after installation.
Water supply requirements:
Inlet water pressure: Max. 1MPa (145psi), Min. 50kPa (7.3psi)
z
Inlet water flow rate: Min. 6 litres/minute
z
A pressure-reducing valve must be installed if pressure is higher than 1MPa.
z
For optimum wash performance check the supply pressure is within the
z
recommended range.
New hose sets provided with the washer should be used to connect the washer to the
z
water mains. Old hose sets should not be re-used.
We recommend the inlet hose(s) are changed every 5 years. WARNING: Failure to do so
z
may result in a flood and damage to property.
The hot water temperature should not exceed 65°C and the cold water temperature not
z
exceed 35°C. Temperatures above these may cause the washer to fault or cause damage to
the washer.
WARNING!
SUPPLIED PARTS
Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
z
contact the dealer or retailer you bought the product from to report the damage.
Fisher & Paykel is not responsible for shipping damage.
z
Inlet hoses (2) Inlet valve cap (1)
FRONT LOADER
WASHING MACHINE
WH1160F2, WH1160FG2
USER GUIDE
Plastic plug (6) User guide (1)
Drain hose guide (1) Spanner (1)
3