Roland EV-1-WL Connection Manual page 53

Connection 2: Connecting the
EV-1-WL and AC-22LX Editor
Here's how to pair the EV-1-WL with the AC-22LX
Editor via BLE MIDI.
1.
Rapidly press the [Bluetooth] button
on the EV-1-WL twice to make the
Bluetooth indicator blink blue.
If the indicator remains lit blue, the unit is already
paired to another mobile device. In this case,
long-press the [Bluetooth] button on the EV-1-WL
to unpair the mobile device with this device, and
then do as shown above to make the indicator
blink blue.
2.
Press the EV-1-WL's [Bluetooth] button.
The EV-1-WL enters pairing mode, and the
Bluetooth indicator rapidly blinks blue.
3.
Select "EV-1-WL+" from the AC-22LX
Editor app.
The Bluetooth indicator on the EV-1-WL stops
blinking and remains lit when pairing is finished.
When the devices are correctly connected, their
respective statuses are as follows.
53