Camera Introduction Connection Diagram Antenna Router Mount Metal Aluminum Case Spotlight IR LEDs High Definition Lens 1.Connect the included power adapter to the NVR and a power outlet. Daylight Sensor 2.Connect the NVR to your router with an Ethernet cable (if you hope to use it remotely).
Or you can set it later in “Settings > System >Info”. Connect the NVR to a router using the included Ethernet cable. 2.Download and launch the Reolink App or Client and follow the instructions to access the NVR. • On Smartphone Scan to download the Reolink App.
Mount Tips for the Camera Troubleshooting Installation Tips Camera Not Displaying lmages on the Monitor • Do not face the camera towards any light sources. Cause 1:Camera is not Powering on • Do not point the camera towards a glass window. Or, it may result in poor image quality because of the window glare by infrared LEDs, Solutions: ambient lights or status lights.
• Install antennas on the camera and the NVR. interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. If these won‘t work, please contact Reolink Support https://support.reolink.com Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 7
Simplified EU Declaration of Conformity licence-exempt RSS(s). Operation is subject to the following two conditions: Reolink declares that this device is in compliance with the essential (1) This device may not cause interference. requirements and other relevant provisions of Directive 2014/53/EU and (2) This device must accept any interference, including interference that Directive 2014/30/EU.
Page 8
Reolink Official Store or a Reolink authorized reseller. Learn more: https://reolink.com/warranty-and-return/. Terms and Privacy Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com. Keep out of reach of children. English...
Need help?
Do you have a question about the B800W and is the answer not in the manual?
Questions and answers