Side Mounting Kit For Low Loss Header; Appendix C - Approved System Cleaners, Inhibitors And Antifreeze - Rinnai E75CRN Installation & Servicing Instructions Manual

B.2
Appendix C -
i
NOTICE
94
Side mounting kit for the Low Loss header
A side mounting kit for the low loss header is available as an accessory. This kit
relocates the low loss header from directly below the boiler to the left side of the boiler
only. The kit includes all the parts required to relocate the low loss header including
all mounting brackets and material. This kit provides an alternative to for installations
with height limitations and allows for an alternative piping installation.
Kit 1 for boiler models E50CR, E75CR and E110CR Rinnai part number: 804000071.
Approved system cleaners, inhibitors and antifreeze
The following is a list of approved system cleaners, inhibitors, and antifreeze.
Approved antifreeze:
• Rhomar RhoGard Mutli-Metal (AL safe)
• Noble Noburst AL
Approved system cleaner:
• Noble Noburst Hydronic System Cleaner
• Rhomar Hydro-Solv 9100
The system cleaners from NoBurst, Rhomar, and Fernox are NOT to be used in
the boiler. The boiler must be closed off (valved off) from the rest of the system
or not connected while the cleaners are in the system. The system should then
be drained and then thoroughly flushed with clean water to remove all the
system cleaner.
Approved inhibitors:
• Rhomar Pro-tek 922
• Noble Noburst AL inhibitor
• Sentinel X500
• Fernox Alphi 11
• Fernox F3 Cleaner
• Sentinel X400
• Sentinel X100