System Setup; Memory - MSI MS-S278 User Manual

System Setup

⚠
Important
Before removing or installing any components, make sure the system is not turned
∙
on or connected to the power.

Memory

1. Unlock the DIMM slot by flipping open its side clips.
2. Vertically insert the DIMM into the DIMM slot. The DIMM has an off-center notch at
the bottom that will only allow it to fit one way into the DIMM slot.
3. Push the DIMM deeply into the DIMM slot. The side clips of the slot will
automatically close when the DIMM is properly seated and an audible click should
be heard.
4. Manually check if the DIMM has been locked in place by the DIMM slot's side clips.
⚠
Important
You can barely see the golden finger if the memory module is properly inserted in the
DIMM slot.
16
System Setup