Automatic Scrolling Of Live Video Of The Main Monitor And The Monitor 2 At Identical Intervals (Example: 5 Seconds); Automatic Scrolling Of Live Video Of The Main Monitor And The Monitor 2 At Individual Intervals - Sanyo DSR-3706PA Instruction Manual

Screen settings
Automatic scrolling of live video of the
B main monitor and the monitor 2 at
identical intervals (example: 5 seconds)
1
Display the <SCREEN SET> screen as explained in
"Displaying the screen settings" (P71).
MENU
(S)
2
Turn the J-dial to select "2. SEQUENCE", and then
turn the S-dial clockwise.
Selections: 1/2/ ... 29/30SEC/INDIV.
The "1SEC" indicator starts blinking.
After specifying the number of seconds, the cursor will
not move to the "SEQUENCE SET" position. This way
the automatic sequence will be set to the same interval.
2.SEQUENCE
3
Turn the J-dial to select the 2. SEQUENCE
(example: 5 seconds), and then turn the S-dial
clockwise.
2.SEQUENCE
4
Press the EXIT/OSD button.
EXIT/OSD
5
Press the SEQUENCE button.
SEQUENCE
73 How to set
<MAIN MENU>
4.SCREEN SET
<SCREEN SET>
1.MULTI SCREEN : CHANGE
QUAD POSITION SET ->
MULTI 6 POSITION SET ->
2.SEQUENCE : 5SEC
SEQUENCE SET ->
MAIN/MON.2 MONITOR SET ->
3.MASK : OFF
MASK SET ->
4.COLOR LEVEL SET ->
: 1SEC
: 5SEC
Automatic scrolling of live video of the
B-1 main monitor and the monitor 2 at
individual intervals
1
Display the <SCREEN SET> screen as explained in
"Displaying the screen settings" (P71).
2
Turn the J-dial to select "2. SEQUENCE", and then
turn the S-dial clockwise.
Selections: 1/2/ ... 29/30SEC/INDIV.
The "1SEC" indicator starts blinking.
2.SEQUENCE
3
Turn the J-dial to select "INDIV.", and then turn the
S-dial twice clockwise.
The <SEQUENCE SET> screen appears.
(S)
4
Turn the S-dial clockwise.
The "1SEC" of MAIN MON. FULL starts blinking.
5
Setting the interval time between the MAIN MON.
and the MON2.
1
Turn the J-dial to select "5SEC" for "MAIN MON.
FULL", and then turn the S-dial twice clockwise.
Selections: 1/2/ ... 29/30SEC/INDIV.
2
Turn the J-dial to select "10SEC" for "MAIN MON.
QUAD", and then turn the S-dial twice clockwise.
Selections: 1/2/ ... 29/30SEC
3
Turn the J-dial to select "15SEC" for "MON.2
FULL", and then turn the S-dial clockwise.
Selections: 1/2/ ... 29/30SEC/INDIV.
MAIN MON. FULL : 5SEC
QUAD : 10SEC
MON.2 FULL : 15SEC
6
Press the EXIT/OSD button.
EXIT/OSD
7
Press the SEQUENCE button.
The monitor video will be switched the following way:
• Main monitor full-screen video every 5 seconds
• Main monitor quad-screen video every 10 seconds
• Monitor 2 full-screen video every 15 seconds
SEQUENCE
: 1SEC
<SEQUENCE SET>
MAIN MON. FULL : 1SEC
QUAD : 1SEC
MON.2 FULL : 1SEC