Using The Vga Feature Connector - Epson Progression User Manual

Using the VGA Feature Connector

The VGA feature connector on your computer's main system
board allows you to connect an optional, high-resolution
graphics adapter card interface cable. See the "Main System
Board Map" on page 3-3 to locate the connector.
If you want to attach a graphics adapter card cable to the VGA
feature connector, follow these steps:
1. Install the graphics adapter card in your computer. See
"Installing an Option Card" on page 3-8 for instructions.
2. Attach the cable that came with your graphics card to the
interface on the card itself. Check your graphics card
manual for more information.
3. Attach the other end of the graphics card cable to the VGA
feature connector on the main system board.
Note
You do not need to disable the built-in VGA adapter if you
connect your graphics adapter card to the feature connector.
3-34 Installing and Removing Options