Network Menu
See the Network Guide for each setting.
Note:
This menu may not be available depending on the printer model.
Printer Adjust Menu
Enter the Support Mode by pressing the d Down button while
turning the printer on, to make the Printer Adjust Menu appear.
Note:
This menu is a special function. You don't have to change it for ordinary
use.
Item
Normal
SemiThk
Thick
ExtraThk
Card
Envelope
Feed Offset
Scan Offset
Feed Offset2
Scan Offset2
Calibration
Normal
Adjust the density for normal paper. The setting becomes darker
as the value increases.
258
Functions of the Control Panel
Settings (default in bold)
0 ... 5 ... 15
0 ... 5 ... 15
0 ... 5 ... 15
0 ... 5 ... 15
0 ... 5 ... 15
0 ... 5 ... 15
-3.5 ... 0.0 ... 3.5 mm
-3.5 ... 0.0 ... 3.5 mm
-3.5 ... 0.0 ... 3.5 mm
-3.5 ... 0.0 ... 3.5 mm