Setting Up Your Printer As A Shared Printer - Epson Aculaser C1100 Series Instruction Manual

❏ For Windows NT 4.0, see "With Windows NT 4.0" on page
138.
Note:
❏ When sharing the printer, be sure to set EPSON Status Monitor 3
so that the shared printer can be monitored on the print server. See
"Setting Monitoring Preferences" on page 71.
❏ When you are using a shared printer in a Windows Me, 98, or 95
environment, on the server, double-click the Network icon in
Control panel and make sure that the "File and printer sharing for
Microsoft Networks" component is installed. Then, on the server
and clients, make sure that the "IPX/SPX-compatible Protocol" or
the "TCP/IP Protocol" is installed.
❏ The print server and clients should be set on the same network
system, and they should be under the same network management
beforehand.
❏ The screen may vary depending on your operating system version.

Setting up your printer as a shared printer

When the print server's OS is Windows Me, 98, or 95, follow the
steps below to set the print server.
1. Click Start, point to Settings, then click Control Panel.
2. Double-click the Network icon.
3. Click File and Print Sharing on the Configuration menu.
4. Select the I want to be able to allow others to print to my
printer(s). check box, then click OK.
5. Click OK to apply the settings.
124
Setting Up Your Printer on a Network