Labels - Epson Aculaser C1100 Series Instruction Manual

Labels

You can load up to 75 sheets of labels into the MP tray at one time.
However, you may need to feed some labels one sheet at a time,
or load them manually.
Note:
❏ Duplex printing is not available for labels.
❏ Depending on the quality of labels, the printing environment, or the
printing procedure, labels might be wrinkled. Make a trial print run
before you print on a lot of labels.
When loading labels, you should make paper settings as shown
below:
❏ Make settings on the Basic Settings menu in the printer driver.
Paper Size:
Paper Source:
Paper Type:
❏ You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 251.
Note:
❏ You should only use labels designed for laser printers or plain-paper
copiers.
❏ To prevent the label adhesive from coming into contact with printer
parts, always use labels that completely cover the backing sheet, with
no gaps between the individual labels.
❏ Press a sheet of paper on top of each sheet of labels. If the paper sticks,
do not use those labels in your printer.
A4 or LT
MP Tray (up to 75 sheets)
Labels
Paper Handling
2
2
2
2
2
2
2
2
2
2
2
2
37