Adjustment Mode Selection - KERN PLS Series Operating Manual

8.1 Adjustment mode selection

 In the weighing mode press and hold the MENU button until the
 Using the navigation buttons , select the menu item <Calibration
 Confirm by pressing the PRINT button, the current setting will be
 Using the navigation buttons , select the required setting.
Auto. calibration
Internal calib.
External calib.
Technical calib.
 After the "Internal, external or automatic adjustment" option is
 To leave the menu/return to the weighing mode, press and hold the
TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112
sound signal stops. The configuration menu is displayed.
mode>.
displayed.
Automatic adjustment using the internal weight.
Factory setting in the models in the verifiable setting.
Adjustment using the internal weight after the CAL button
is pressed.
Not available in the models in the verifiable setting.
Adjustment using the external weight, not available in the
models in the verifiable setting.
In models with the internal adjustment weight we do not
recommend adjustment using the external weight.
Changing the weight of the internal calibration weight.
Not available in the models in the verifiable setting.
selected confirm by pressing the PRINT button.
After the "Technical adjustment" option is selected, to confirm press
and hold the PRINT button until the sound signal stops.
The scale will be switched to the menu again.
MENU button until the sound signal stops.
35