Seagate EXOS ST24000NM001H Product Manual page 21

www.seagate.com
S.M.A.R.T. Read Data Reports
• Attribute 192 - Emergency Retract Count
• Attribute 193 - Load/Unload Cycle Count
PowerChoice Manufacture Default Power Condition Timer Values
Default power condition timer values have been established to assure product reliability and data integrity. A minimum
timer value threshold of two minutes ensures the appropriate amount of background drive maintenance activities occur.
Attempting to set a timer values less than the specified minimum timer value threshold will result in an aborted EPC "Set
Power Condition Timer" subcommand.
Power Condition Name
Idle_a
Idle_b
Idle_c
Standby_z
Setting power condition timer values less than the manufacturer specified defaults or issuing the EPC "Go to Power
Condition" subcommand at a rate exceeding the default timers may limit this products reliability and data integrity.
PowerChoice Supported Extended Power Condition Feature Subcommands
EPC Subcommand
00H
01H
02H
03H
04H
05H
PowerChoice Supported Extended Power Condition Identifiers
Power Condition Identifiers
00H
01 - 80H
81H
82H
83H
84 - FEH
FFH
Seagate Exos X24 SATA Product Manual, Rev. A (Draft 1)
Manufacturer Default Timer Values
100 ms
2 min
4 min
15 min
Description
Restore Power Condition Settings
Go to Power Condition
Set Power Condition Timer
Set Power Condition State
Enable EPC Feature Set
Disable EPC Feature Set
Power Condition Name
Standby_z
Reserved
Idle_a
Idle_b
Idle_c
Reserved
All EPC Power Conditions
Drive specifications
20