Table of Contents
Advertisement
www.seagate.com
Drive specification
Altitude, non-operating
(below mean sea level, max)
Operational Shock (2 ms)
Non-Operational Shock (2 ms)
Linear Random Operating Vibra-
tion
Random Rotary Operating Vibra-
tion
Linear Random Non-Operating
Vibration
Drive acoustics, sound power
(bels)
Idle
Performance seek
Nonrecoverable read errors
Annualized Failure Rate (AFR)*
Maximum Rated Workload*
Warranty
Load-unload cycles
Supports Hotplug operation per
Serial ATA Revision 3.3 specifica-
tion
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary
depending on operating environment and formatting.
*See Section 2.9, "Reliability" for rated MTBF device operating condition requirements.
Seagate Exos X24 SATA Product Manual, Rev. A (Draft 1)
ST16000NM001H
ST16000NM002H
–304.8 m to 12,192 m
(–1000 ft to 40,000+ ft)
40 Gs
200 Gs
5–500 Hz:
0.70 Grms
20–1500Hz: 12.5 rads/s²
2–500 Hz:
2.27 Grms
2.8
(typical)
3.0
(max)
During periods of drive idle, some offline activity may occur according to the
SMART specification, which may increase acoustic and power to operational levels.
3.2
(typical)
3.4
(max)
1 sector per 1015 bits read
0.35% based on 8760 POH
Maximum rate of <550TB/year
Workloads exceeding the annualized rate may degrade the drive MTBF and impact product reliability.
The Annualized Workload Rate is in units of TB per year, or TB per 8760 power on hours. Workload
Rate = TB transferred * (8760 / recorded power on hours).
To determine the warranty for a specific drive, use a web browser to access the following web page:
www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to be pro-
vided: the drive serial number, model number (or part number) and country of purchase.The system will
display the warranty information for the drive.
600,000
Yes
ST12000NM001H
ST12000NM002H
Drive specifications
ST10000NM021H
11
Advertisement
Table of Contents
